Google Reviews
ATV320U40N4C
variable speed drive, Altivar Machine ATV320, 4kW, 380 to 500V, 3 phases, compact
Disponible
Obtenez un devis maintenant
Cliquez pour voir la vidéo 
Cliquez pour voir l'image
This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its compact form factor allows vertical stacking of drives inside machine frames. It works at a rated power up to 4kW / 5hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM). It is eco-friendly and complies with directives such as RoHS, WEEE, etc.relating to environmental protection.
Plus d'informations
Lire moins
Lire moins
| Specification | Value |
|---|---|
| Prospective Line Isc | 5 kA |
| Network Frequency | 50-60 Hz |
| Power Dissipation In W | fan 111 W 380 V 4 kHz |
| Line Current | 13.7 A 380 V heavy duty) || 10.6 A 500 V heavy duty) |
| Analogue Output Type | software-configurable current AQ1 0...20 mA 800 Ohm 10 bits || software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits |
| Discrete Output Type | open collector DQ+ 0-1 kHz 30 V DC 100 mA || open collector DQ- 0-1 kHz 30 V DC 100 mA |
| Asynchronous Motor Control Profile | voltage/frequency ratio, 5 points || flux vector control without sensor, standard || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor - Energy Saving || voltage/frequency ratio, 2 points |
| Maximum Switching Current | relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2A, R2C resistive, cos phi = 1 5 A 250 V AC || relay output R2A, R2C resistive, cos phi = 1 5 A 30 V DC |
| 4 Quadrant Operation Possible | true |
| Relative Symmetric Network Frequency Tolerance | 5 % |
| Apparent Power | 9.2 kVA 500 V heavy duty) |
| Net Weight | 2.2 kg |
| With Safety Function Safe Direction (Sdi) | false |
| Relay Output Type | configurable relay logic R1A 1 NO 100000 cycles || configurable relay logic R1B 1 NC 100000 cycles || configurable relay logic R1C || configurable relay logic R2A 1 NO 100000 cycles || configurable relay logic R2C |
| Switching Frequency | 2...16 kHz adjustable || 4...16 kHz with derating factor |
| Analogue Input Number | 3 |
| Motor Slip Compensation | automatic whatever the load || adjustable 0...300 % || not available in voltage/frequency ratio (2 or 5 points) |
| Discrete Output Number | 3 |
| With Safety Function Safe Position (Sp) | false |
| Method Of Access | slave CANopen |
| With Safety Function Safely Limited Position (Slp) | false |
| With Safety Function Safe Operating Stop (Sos) | false |
| Discrete Input Number | 7 |
| With Sft Fct Safe Stop 2 (Ss2) | false |
| With Safety Function Safe Stop 1 (Ss1) | true |
| Width | 140 mm |
| Depth | 158.0 mm |
| Analogue Input Type | AI1 voltage 0...10 V DC 30 kOhm 10 bits || AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits || AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits |
| Maximum Output Frequency | 0.599 kHz |
| With Safety Function Safe Brake Management (Sbc/Sbt) | false |
| Height | 184.0 mm |
| Acceleration And Deceleration Ramps | linear || U || S || CUS || ramp switching || acceleration/deceleration ramp adaptation || acceleration/deceleration automatic stop with DC injection |
| Maximum Output Voltage | 500 V |
| Base Load Current At High Overload | 9.5 A |
| With Safety Function Safe Speed Monitor (Ssm) | false |
| Transient Overtorque | 170-200 % of nominal motor torque |
| With Safety Function Safe Torque Off (Sto) | true |
| Analogue Output Number | 1 |
| Minimum Switching Current | relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC |
| Discrete Input Logic | positive logic (source) || negative logic (sink) |
| With Safety Function Safe Programmable Logic | false |
| Brake Chopper Integrated | true |
| Nominal Switching Frequency | 4 kHz |
| Braking To Standstill | by DC injection |
| Discrete Input Type | STO safe torque off, 24 V DC1.5 kOhm || DI1...DI6 logic inputs, 24 V DC 30 V) || DI5 programmable as pulse input 0-30 kHz, 24 V DC 30 V) |
| Protection Type | input phase breaks drive || overcurrent between output phases and earth drive || overheating protection drive || short-circuit between motor phases drive || thermal protection drive |
| With Safety Function Safely Limited Speed (Sls) | true |
| Synchronous Motor Control Profile | vector control without sensor |
| Variant | standard version |
| Format Of The Drive | compact |
| Product Or Component Type | variable speed drive |
| Ip Degree Of Protection | IP20 |
| Communication Port Protocol | Modbus serial || CANopen |
| Nominal Output Current | 9.5 A |
| Product Specific Application | complex machines |
| Option Card | communication module, CANopen || communication module, EtherCAT || communication module, Profibus DP V1 || communication module, PROFINET || communication module, Ethernet Powerlink || communication module, EtherNet/IP || communication module, DeviceNet |
| Range Of Product | Altivar Machine ATV320 |
| Motor Power Kw | 4.0 kW heavy duty |
| [Us] Rated Supply Voltage | 380...500 V - 15...10 % |
| Mounting Mode | wall mount |
| Emc Filter | Class C2 EMC filter integrated |
Plus d'informations
Lire moins
Lire moins
*Les articles neufs bénéficient d'une garantie Obso de 24 mois.
Nos articles d'occasion et nos options de réparation sont assortis d'une garantie Obso de 12 mois.
"Super service ! Tout a été traité très rapidement et avec compétence et l'assistance personnelle était excellente. Je choisirai toujours Obso Automation ! Merci beaucoup pour votre soutien." - MJ
Nos articles d'occasion et nos options de réparation sont assortis d'une garantie Obso de 12 mois.
"Super service ! Tout a été traité très rapidement et avec compétence et l'assistance personnelle était excellente. Je choisirai toujours Obso Automation ! Merci beaucoup pour votre soutien." - MJ
*La livraison et l'enlèvement le jour même et le jour suivant sont disponibles pour les stocks de nos succursales au Royaume-Uni et aux Pays-Bas. La livraison et l'enlèvement le jour suivant et la livraison en deux jours sont disponibles pour les stocks provenant de nos partenaires. Dans 90% des cas, nous pouvons livrer plus rapidement que l'ETA du fabricant si nécessaire.
Des options de livraison standard sont également disponibles si nécessaire.
"Professionnel, courtois et précis. La pièce obsolète a fait l'objet d'un devis le jour même et a été livrée le lendemain" - PT
Des options de livraison standard sont également disponibles si nécessaire.
"Professionnel, courtois et précis. La pièce obsolète a fait l'objet d'un devis le jour même et a été livrée le lendemain" - PT
Nous sommes accrédités ISO 9001, ce qui vous permet d'acheter en toute tranquillité.
1
Step 1
Partie ajoutée pour enquête
2
Étape 2
Votre gestionnaire de compte personnel est déjà sur le coup et vous fournit des réponses rapides avec un service imbattable.
3
Étape 3
Nous ne nous contentons pas de traiter les commandes, nous garantissons une livraison sans heurts, une transparence totale et une absence totale de maux de tête.
4
Étape 4
Plus de 10 000 clients nous font confiance pour une bonne raison. Obtenez votre devis dès maintenant et découvrez l’automatisation sans risque, ni délai, ni incertitude.
